0025 Specification Loadcell Model: 29/APB0025VB

Download Spec Sheet in PDF Format ►


Assembly Numbers
29/APB0025EB Loadcell Only
Structural Configuration
Single ended, rigid-mount bending pin
Compression loading
Bare Weight
Static Capacity
Dynamic Capacity
Safe Overload
100% of Static Capacity
Ultimate Overload
Minimum of 200% of Static Capacity
Loadcell Body Material
4340 alloy steel, heat treated to 180,000psi yield strength
Frame Mounting Bolts(3)
90/886012 ¾"-16TPI x6", Grade 8
Recommended Torque: 470Nm(350ft/lb)
Front Bolt
90/986016 1"-14TPI x6", Grade 8
Recommended Torque: 1080Nm(800ft/lb)
4 pin military style, injection moulded
Custom 4 core with polyurethane jacket and flexible armoured jacket


15 volts (AC or DC)
5-10 volts Recommended
0.5.mv/v @ 5,670kg
350Ω +/- 1.0Ω
500MΩ at 50 volts

Dimensions and Mounting Instructions

IMPORTANT This Loadcell must be mounted in accordance with Elphinstone Instructions. Failure to do so may void warranty. Specifications to change without notice. These specifications supercede all previous specifications as of October 2006.


  1. 355 mm
  2. 152 mm
  3. 101 mm
  4. 102 mm
  5. 63 mm
  6. 1" Bolt to suit
  7. 89 mm
  8. 37 mm
  9. 37 mm
  10. 51 mm
  11. 19 mm
  12. ¾" Bolt to suit


  1. Excitation +
  2. Signal +
  3. Signal -
  4. Excitation -

Mounting Requirements

  • Top Plate must be dead stiff and machined flat after welding
  • Bottom Mounting must be dead stiff
  • Bearing plate must be welded using 10mm fillet
  • Across end and fully down each side


  • Do not strike an Arc on the loadcell body with a welder
  • It is Ok to use the loadcell to position the Bearing plate for tack welding only
  • Remove the loadcell to complete welding procedure
  • Do not damage the bottom cover plate as this protects delicate strain gauges
  • Take care to protect the loadcell connector/cable as this can not be replaced in the field
  • Fit protection for the loadcell connector from stones and foreign objects which may damage it
  • Do not damage or paint over the Part/Serial Number identification tag


Maximum Dynamic Load
4,500kg (10,000lb)
Maximum Static Load
6,000kg (13,200lb)

Bolt Tensions

¾" Base mounting bolt
540Nm (400ft/lb)
1" End mounting bolts
1080Nm (800ft/lb)
Coat all bolt threads with anti-seize

Download Spec Sheet in PDF Format ►

Contact Us

If you have any enquiries about the products you've seen on this page, please do not hesitate to get in touch with us at any time for more information.

Weighing Systems

Elphinstone Australia Weighing Systems


Elphinstone Australia Trailers

Antarctic Equipment

Elphinstone Australia Antarctic Equipment

Parts and Services

Elphinstone Australia Antarctic Equipment